This is a split face office building that we are building in Casa Grande right now
We had a chance to watch the Adobe making machine in action while I was picking up samples for a job that we are stain the near future.
Here are a few photos of Two walls that we just got done building for risen Savior Lutheran Church in Chandler Arizona. It is an Oldcastle product split face in a “Bone” color. The block is laid in a random repeating bond pattern called an “Ashlar” since this wall is the centerpiece of their auditorium, all eyes will be on it all of the time! That’s why the builder chose us to do the work.
We are about 3/4 through this project in Mesa Arizona. It is the new facility for Mow Power, A small equipment repair/rental company. We have also inserted a small video of the grout pumping process.
Sometimes you want to do something a little different with your home. This identifies your property as yours and allows your personality to come forward. Architectural features are a great way to do that. They add a uniqueness to your home that no one else has. Here’s a couple of examples of architectural features that we built for a customer that can really make your home and property stand out.
One of the most common repairs that we do is fence repair. This particular fence had a tree planted very close to it. The tree roots cracked the fence and could have eventually caused serious damage to the wall.
In this case ,The homeowner had the tree removed and called us in to repair that part of the wall. This was all that was needed to prevent further damage.
There are a lot of car accidents here in the valley. In this case Two vehicles were racing and crashed into the site wall and the monument sign of a big box home-improvement store in Phoenix.
They called us and asked us to make the repairs. This involved tearing out and replacing all of the damaged block, checking the structural integrity of the footing, bringing the reinforcing and Grout up to current standards, and apply a matching stucco and masonry paint.
Here are the photos of the repaired site wall and signage base before paint.
The finished product is just like new!
Below are some Photos of a recently completed Custom Home project in Paradise Valley Arizona.
This Project combines retro Slump Block with a Modern design for a really cool look.
This home presented some challenges for us. The Raked (sloped) walls and the two massive gas Fireplaces with Herringbone patterned block were the toughest part of this job.
General Contractor for this home is Truvista development. https://truvistadev.com/
Our latest Project…
This is a custom curved seat wall and radius fire pit that we built for a contented customer in Gilbert Arizona. The General Contractor was The Bruce Gardner Company.
Custom cutting the Travertine Tile to allow for the curve of the bench and fire pit walls was a quite the challenge.
We applied Veneer stone to the face and back of the wall for a great look!
The seat back was stuccoed with a brown mortar. Notice that the Travertine has a bull nose finish on the edge for comfort and style.
This is the radius fire pit wrapped in veneer stone with a custom fit Travertine top. it is now ready to receive the gas insert.
The homeowners also extended their Patio so more columns were added to support it. these were wrapped in Stone and Stuccoed.