This is our personal BBQ/Outdoor Fireplace/Pizza Oven Designed by Darrin, and built by our employees from the footings, to the pavers to the brick, and even the tile.
When you need a Barbeque, Fireplace, or even a Brick oven, you can feel confident that the employees of Darrin Gray Corp. Masonry Division will get it done right, on time, and at a reasonable price.
Below are few photos of a Fireplace/ kitchen remodel that we completed in East Mesa recently. The brick that we used is called General Shale ironworks (Old Carbondale)
Our Brick/Thin brick supplier was Marvel Masonry Supply http://www.marvelmasonry.com/
We built this 4 opening tiered fireplace in South Phoenix. It is the Centerpiece of the room and presented several unique engineering and design challenges. Mason, Jason Riggs (red shirt), was definitely up to the task as the chimney worked flawlessly without the need for a forced air fan to help it draw properly.
(Darrin’s father, Dale Gray, is in the blue shirt and jacket at left, making sure that Darrin’s men are still “Doing it Right.”)
4 opening fireplace finished product
This is a Custom Outdoor Fireplace with a “Herringbone Pattern Firebox” that we did for a Customer in Tucson, AZ. The brick are called “Klinker Brick” and are literally antique brick salvaged from old buildings. Klinker Brick create a wonderful rustic look that will look great for years to come!
http://www.brick-floor-tile.com/ was our supplier for this project.
The above photo is of a Cantilevered, raked joint, 3 sided fireplace that we completed in Carefree, Arizona in early 2013. It was designed to be completely open on 3 sides with a monolithic column on the supporting side to hold up the rest of the structure. It presented several challenges in both the design and construction phases.
This is an outdoor fire pit with a sit wall that we built in Cave Creek, Arizona. It is now ready to have the stucco and tile applied.